Don’t the lights present on your WiFi range extender look pretty when they glow-up? Of course, they do! But, the event is not pretty at all when any of the LED lights present on a Netgear WiFi range extender does not turn green. Instead, it starts flashing the color red or orange. You reading this post is a sign that you’ve also become a victim of the Netgear extender not turning green problem.
But, why stress over the problem when you can do away with it using some simple hacks? Wondering what those hacks are? For this, we recommend you walk through the upcoming sections. However, before that, we would like to tell you that the tips jotted down here apply equally no matter if you’ve done the www mywifiext net n300 setup or have installed an AC750 extender bankrolled by Netgear. Considering this statement, read on.
Netgear Extender Not Turning Green: Solutions
Follow the hacks given below if you want the LED lights on your range extender to turn green as soon as possible:
Tip 1: Power Cycle the Extender
If your range extender is not illuminating green, then its foremost cause might be a technical bug. After all, changes happening in the technical realm are numerous and hence they can invite glitches to your table. But, whatever the reason behind them is, you can get rid of them with a simple power cycle of your range extender. Therefore, without wasting a second, go for the process by powering down your networking device. Once it is done, you are supposed to make the extender rest and power it up after a few moments get passed.
Tip 2: Ensure Proper Power Supply
While you were trying to power cycle your range extender, did you notice any deformity in the power socket? Yes? Well, there is a possibility that the Netgear extender not turning green problem is the curse of the aforementioned factor. You must keep in mind that the power socket supplying electricity to your wireless range extender must be in a working state. So, use the one that is all well. However, you are free to take the assistance of a UPS in case your area does not receive a consistent power supply from the backend.
Tip 3: Check the Extender-Router Connection
The extender-router connection is another factor that decides the colors illuminated by the LED lights of your range extender. FYI, the range extender won’t turn green if its connection with the host router is shaky. Well, it depends on the source of connection used by you. If the wireless source is doing the connection job, then you must make sure that both your WiFi devices stay in each other’s range. But, if you have put a network cable to use, then its physical condition impacts the router-extender connection a lot. It should not be worn out in any scenario. Also, the connection between your devices should be strong [finger-tight].
So, these were the tips that you can follow if your Netgear range extender won’t turn green. You can reset your device to the default factory mode if all of the aforesaid hacks fail to favor you. But, remember that you will be required to carry out the mywifiext setup process again once you reset the extender. However, we assure you that the color illuminated by the light of your WiFi device will change. Count it as a bonus, but we don’t want you to struggle with the same issue in the future. With that said, refer to the next section to know what can be done to prevent the occurrence of this issue.
Avoiding Netgear Extender Not Turning Green Issue
When you did the extender setup for the first time, you might have come across the term “Firmware Update”. This is to notify you that it is necessary to update the firmware of your range extender regularly. The reason being, it resolves performance bugs and enhances the extender’s efficiency. And, most importantly, it helps to keep the Netgear extender not turning problem at bay.
